Ricoh AficioSP C410DN Software Manual page 282

Special Operations under Windows
Note
❒ Match the data format of the file to be printed with the emulation mode of the
printer.
❒ If the message "print requests full" appears, no print jobs can be accepted. Try
again when sessions end. For each command, the amount of possible sessions
is indicated as follows:
• lpr: 10
• rcp, rsh: 5
• ftp: 3
• sftp: 3
❒ Enter the file name in a format including the path from the directory execut-
ing commands.
Reference
The "option" specified in a command is an intrinsic printer option and its syn-
tax is similar to printing from UNIX. For details, see UNIX Supplement.
lpr
❖ When specifying a printer by IP address
c:> lpr -Sprinter's IP address [-Poption] [-ol] \pass
name\file name
❖ When using a host name instead of an IP address
8
c:> lpr -Sprinter's host name [-Poption] [-ol] \pass
name\file name
When printing a binary file, add the "-ol" option (lowercase O, and lowercase
L).
When using a printer with the host name "host" to print a PostScript file named
"file 1" located in the "C:\PRINT" directory, the command line is as follows:
c:> lpr -Shost -Pfiletype=RPS -ol C:\PRINT\file1
rcp
First, register the printer's host name in the hosts file.
c:> rcp [-b] \pass name\file name [pass name\file name...]
printer's host name:[option]
Note
❒ In file names, "*" and "?" can be used as wild cards.
❒ When printing a binary file, add the "-b" option.
When using a printer with the host name "host" to print a PostScript file named "file
1" or "file 2" located in the "C:\PRINT" directory, the command line is as follows:
c:> rcp -b C:\PRINT\file1 C:\PRINT\file2 host:filetype=RPS
270