Ricoh AficioSP C410DN Software Manual page 180

Making Printer Settings Using the Control Panel
❖ Machine IPv4 Address
You can select whether to set the IPv4 address automatically or manually.
• Auto-Obtain (DHCP)
When DHCP is set to on, the IPv4 address cannot be changed. To
change it, set DHCP to off. Contact your network administrator for in-
formation about the network configuration.
• Specify
You can specify the IPv4 address.
Note
❒ Default: 011.022.033.044
• Sub-net Mask
You can specify the subnet mask.
When DHCP is set to on, the subnet mask cannot be changed. To change
it, set DHCP to off. Contact your network administrator for information
about the network configuration.
5
Note
❒ Default: 000.000.000.000
• Gateway Address
You can specify the gateway address.
When DHCP is set to on, the gateway address cannot be changed. To
change it, set DHCP to off. Contact your network administrator for in-
formation about the network configuration.
Note
❒ Default: 000.000.000.000
❖ IPv6 Stateless Setting
You can enable or disable IPv6.
• Effective
• Invalid
Note
❒ Default: Effective
❖ NW Frame Type
You can select the frame type for NetWare.
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
Note
❒ Default: Auto Select
168