Installing The Postscript 3 Printer Driver (Windows 95/98/Me - Tcp/Ip) - Ricoh AficioSP C410DN Software Manual

Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ This allows a SmartDeviceMonitor for Admin user to display and check
the number of sheets each user prints. For details, see SmartDeviceMonitor
for Admin Help.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.51 "If a
Message Appears during Installation".

Installing the PostScript 3 Printer Driver (Windows 95/98/Me - TCP/IP)

A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local Printer], and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
G
Select the name of the printer whose driver you want to install, and then
click [Next >].
H
In the [Available ports:] box, click [Printer Port], and then click [Next >].
I
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
J
Specify whether or not to print a test page, and then click [Finish].
K
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
L
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties].
Using the SmartDeviceMonitor Port
1
11