Ricoh AficioSP C410DN Software Manual page 22

Preparing for Printing
G
Select the printer model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
H
Double-click the printer name to display the printer settings.
1
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
I
Click [Port:], and then click [Add].
J
Click [SmartDeviceMonitor], and then click [OK].
K
Click [IPP].
L
In the [Printer URL] box, enter "http://printer's address/printer" as the printer's
address.
If the server authentification is issued, to enable SSL( a protocol for encrypted
communication), enter "https://printer's address/printer" (Internet Explor-
er 5.01, or a higher version must be installed).
(example IPv4 address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://printer's address/ipp" as the printer's address.
If you are using Firefox or Netscape under Windows XP SP2 or Windows
Server 2003, you can enter IPv6 address as "http:// IPv6 printer's ad-
dress/printer".
M
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
N
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O
Click [OK].
P
Check that the port of the selected printer is displayed in [Port:].
Q
Set a [User Code], if necessary.
Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols can be entered.
R
Select the [Default Printer] check box to configure the printer as default.
S
Click [Continue].
Installation starts.
T
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
10