Presetting Stations - Aiwa CSD-MD50 Operating Instructions Manual

PRESETTING STATIONS
PRESETTING STATIONS MANUALLY
2-_._l L3,4
The unit can store 15 preset stations for each band.
When a station is stored, a preset number is assigned to the
station. Use the preset number to tune in to a preset station
directly.
PRESETTING STATIONS AUTOMATICALLY
The unit scans through the receivable frequency range and stores
stations automatically.
m
Presetting stations automatically will clear all previously preset
stations.
1
2
3
4
Press the TUNER/BAND button on the main unit
or the BAND button on the remote control to
select a band.
Press the EDIT button repeatedly until
AUTO SET ? appears.
Within 5 seconds, press the ENTER button.
AUTO START ? appears on the display.
Within 5 seconds, press the ENTER button.
The unit searches for a station within the band selected at
step 1.
When a tuned station is stored, the preset number assigned
to the station flashes.
1 Press the TUNER/BAND button on the main unit
or the BAND button on the remote control to
select a band.
2 Press the ++ or > button or turn the MULTI
JOG dial to select a station.
3 Press the EDIT button repeatedly until MANUAL
SET ? appears.
4 Within 5 seconds, press the ENTER button.
The station is stored and assigned a preset number.
IPRESET NUMBER TUNING
1
42
Press the TUNER/BAND button on the main unit
or the BAND button on the remote control to
select a band.
Press the II button.
Each time the button is pressed, the next ascending preset
number is selected.
Once a preset station is tuned in, the MULTI JOG dial is also
available to select the desired preset station.
"runing by preset number
"1
:!
Press the BAND button on the remote control to select a band.
(Or, use the TUNER/BAND button on the main unit.)
Press the numbered buttons on the remote control to select
a preset number:
Example:
To select preset number 10, press the +1 O and O buttons.
To select preset number 15, press the +10 and 5 buttons.
lrO
clear a preset station
1 Select the preset number of the station to be cleared.
:! Press and hold the II button until CLEAR OK? appears.
3 Within 5 seconds, press the ENTER button.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
II there is a long period of power failure or disconnection of AC
cord, the presetting of the stations is canceled. In this case, preset
again.
When automatic presetting has been completed, the display
returns to the first preset station.
ENGLISH
9