Combining Two Tracks; Changing The Order Ofthetracks - Aiwa CSD-MD50 Operating Instructions Manual

COMBINING TWO TRACKS
You can combine two tracks by erasing the index mark in
between.
Example
To combine the 2nd track and the 3rd track by erasing the index
mark at the beginning of the 3rd track:
1
2
3
2--JI 7
Q---3,4
Insert an MD and play back the latter track of the
two tracks to be combined.
Press the EDIT button repeatedly until Combine?
appears on the display.
Within 10 seconds, press the ENTER button.
Example:
When combining the 2nd and 3rd tracks
4 Within 1 minute, press the ENTER button.
The two tracks are combined.
The track numbers from this point forward are decreased by
1.
When the MD is removed from the unit, TOC-EDIT flashes
and the contents of the editing are registered.
m
If both of the tracks are titled, the title of the lower numbered
track remains. If only one track is titled on the tracks to be
combined, this title remains.
You cannot combine a track recorded in monaural and a track
recorded in stereo.
CHANGING THE ORDER OF THE
TRACKS
You can change the order of tracks after completing a recording.
Example
To move the 3rd track to the 1st position
1
2
3
4
1st track
2nd track 3rd track
4----)f--4
L
2-J '
;,5
Insert an MD and play back the track to be moved.
Press the EDIT button repeatedly until Move ?
appears.
Within 10 seconds, press the ENTER button.
Example:
When moving the 3rd track
Turn the MULTI JOG dial, or Dress the++ or ~
button to select the desired ~rack number to move
the track to.
Example:
When moving to the 2nd position
5 Within 1 minute, press the ENTER button.
When the MD is removed from the unit, TOC-EDIT flashes
and the contents of the editing are registered.
24
ENGLISH