Remote Control; Before Operation - Aiwa CSD-MD50 Operating Instructions Manual

Aiwa md/cd stereo radio receiver operating instructions csd-md50
Hide thumbs Also See for CSD-MD50:
Table of Contents

Advertisement

Available languages

Available languages

REMOTE CONTROL
IBEFORE OPERATION
Inserting batteries
Detach the battery
cover on the rear of the remote
control
and
insert two R6 (size AA) batteries.
R6'(AA)
When to replace the batteries
The maximum
operational
distance
between
the remote control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace
the batteries
with new ones.
To use the remote control
Some
operations
can be performed
using the buttons
on the
remote control
only, or those on the main unit only, while others
can be performed
using the buttons
on the main unit as well as
on the remote control.
This instructions
manual clearly describes
the buttons
available
for each operation.
The >
button on the remote control
starts play of the MD, CD
or the tape, if the corresponding
function
is selected.
If the unit is not going to be used for an extended
period
of
time,
remove
the batteries
to prevent
possible
electrolyte
leakage.
The remote control
may not operate
correctly
when:
- The line of sight between
the remote
control
and the unit is
exposed
to intense
light, such as direct sunlight.
- Other remote controls
are used nearby (television,
etc.)
FUNCTION
To use the
FUNCTION button
Each time the FUNCTION
button is pressed
while power is on,
one of the functions
is selected
cyclically,
as follows.
10 turn the unit on
F'ress the POWER
button.
The unit can also be turned
on by the following
ways:
-Pressing
the CD b
button turns the unit on and starts play of
the inserted
CD.
- Pressing
the MD >
button turns the unit on and starts play of
the inserted
MD.
- Pressing
the TUNER/BAND
button turns the unit on and tunes
in to the previously
tuned station.
- Pressing
the TAPE
+>
button
turns the unit on and starts
play of the loaded tape.
10 turn the unit off
F'ress the POWER
button.
To use the headphones
Connect
the headphones
with a stereo
mini plug (03.5 mm,
'/8
inch) to the PHONES
jack. No sound
will be heard
from the
speakers
while the headphones
are plugged
in.
~
MD +
CD +
TUNER (FM
or
AM) +
TAPE
1
ENGLISH
5

Advertisement

Table of Contents
loading

Table of Contents