Registering The Disc Title And Track Title - Aiwa CSD-MD50 Operating Instructions Manual

REGISTERING THE DISC TITLE
AND TRACK TITLE
You can register the titles of the discs and tracks.
1
2
3
4
5
6
7
8
B"
000
000
000
000
000
0
L
1
@
o
Insert an MD to register the disc or track title,
and press the FUNCTION button on the remote
control to select the MD function.
To register a disc title, press the EDIT button in
stop mode repeatedly until Disc Title? appears.
To register a track title, select or play back the
track and press the EDIT button repeatedly until
Track Title? appears.
Within 10 seconds, press the ENTER button.
The unit turns into character entry mode.
Press the MODE button repeatedly to select the
kind of character.
Capital letters + Small letters
L
Number/symbols "
Turn the MULTI JOG dial to select a desired
character.
Press the P button.
Repeat steps 4 to 6 to enter all the required
characters (up to 50 characters).
If you leave the unit without performing any operation for one
minute in steps 4 to 6, the character entry mode will be
canceled. If this happens, repeat from step 2.
Press the ENTER button.
To change a character
Press the + or > button repeatedly until the character to
be changed flashes. Then enter the desired character again.
To delete characters
Press the + or - button repeatedly until the character to
be deleted flashes. Then press the II button.
To insert a space between the characters
Press the + or - button repeatedly until the part to be
entered as a space flashes. Then press the DISP button.
To add a character between two characters
First, insert a space between two characters as described above,
Then change the space to the desired character by entering it.
While TOC-EDIT is flashing, do not disconnect the AC cord or
do not give a strong shock to the unit. If this happens, the data
of TOC will not be recorded properly and the edited contents
on a disc will not be able to be played.
A title cannot be registered in the following cases:
–When a prerecorded disc is inserted ("PB DISC" appears on
the display.)
–When the protect-tab on an inserted disc is moved to the
protected position ("Protected" appears on the display.)
Editing an MD will cancel the random play mode.
Editing cannot be performed when the unit is in the programmed
play mode.
/-
\
CHARACTERS THAT CAN BE REGISTERED
Capital letters
(space) ABC DE FGHIJKLM NOPQR
ST UVWXYZ
Small letters
(space) abcdefghijklm nopqrstuv
Wxyz
Numbers and symbols
(space) O123456789!"# $%& '()*+
,-.
I :;<=>?@_'
The entered disc title or track title is displayed.
When registering a track title during playback, the track will
be repeatedly played until the ENTER button is pressed.
When the MD is removed from the unit, TOC-EDIT flashes
and the entered title is registered.
22
ENGLISH