Md Guide Messages - Aiwa CSD-MD50 Operating Instructions Manual

Message Cause
Blank Disc Nothing is recorded on the disc.
Can't Edit
Tracks are too short to be joined up.
The combine function was used while playing
back the first track,
MD GUIDE MESSAGES
The divide function is used at the beginning of the
track.
Solution
See "THE LIMITATIONS OF MD" on page 14.
The combine function was used to join a track
recorded in monaural with a track recorded in
stereo,
Disc Error The disc is damaged by scratches.
Replace the disc.
The unit received a strong shock during a l-OC
reading,
Disc Full There is not enough time to record left on tile disc.
Do not subject the disc to strong shock during a
TOC reading.
Replace the disc with another recordable disc,
Temp Over The temperature of the unit is too high. Leave the unit in a cool place for a while before
operating it again,
Emergency
The surrounding temperature is too high or too
low.
The unit operates abnormally due to a scratched
disc or a strong shock.
Operate the unit at moderate room temperature,
Replace the disc, Do not subject the disc to a
strong shock.
PB Disc A prerecorded disc is attempted to edit, Replace the disc with a recordable one.
Protected The disc is record-protected. Slide the record-protect tab on the disc. (See page
18.)
TOC Full
There are too many tracks or emphasis data to be
recorded or edited, or there is no room on the
disc.
Erase tracks.
Mecha Err
Error occurred in the loading mechanism.
(All functions are disabled.)
Turn the power off and disconnect the AC cord
once. Then turn it on again.
If this message still appears, consult your local
Aiwa dealer.
MD Error
An error occurred in the MD unit of this unit.
Contact an Aiwa service representative.
UTOC Error
An error occurred in the TOC of the MD because
the unit was subjected to a strong shock d~lring
recording, or during recording or reading of the
TOC.
Exchange the MD.
Do not subject the unit to strong shocks during
recording, or during recording or reading of the
TOC.
ENGLISH
29