Presetting Stations - Aiwa AV-X220 Operating Instructions Manual

PRESETTING STATIONS
ll_@-
Qi@'Ql@
——-—
I
E=ii u
000
000
000
an
0:;0
00
0
00
UPFEI
DOWN
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
3
Press the TUNER button to select the band, and
press the UPA or DOWN7 button to select a
station. Direct tuning is also available.
Press the SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
Preset "number
Repeat steps 1 and 2.
No 'more stati&s will be stored if a total of 32 stations have
already been stored for all the bands.
m
PRESET NUMBER TUNING
1 Press the TUNER button to select a band.
2 Press the numbered buttons to select a preset
number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press O and 7.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the SET button, and press the SET button again within four
seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
When using the remote control
Press UPM or DOWNK button to select a preset number.
m
The DIGIT buttons on the remote control can not be used when
selecting a preset number.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
11 ENGLISH