Clock Settings; Automatic Off Timer - Panasonic Diga DMR-EZ17 Operating Instructions Manual

Panasonic diga dmr-ez17: user guide
Hide thumbs Also See for Diga DMR-EZ17:
Table of Contents

Advertisement

Clock Settings

With the unit stopped
e, r to select "Setup",
then q.
e, r to select "Clock Settings",
then
Set Clock Automatically
Perform steps 1–3 of "Clock Settings".
e, r to select "Set Clock
Automatically", then
to start auto setting.
The following dialog appears when setting is
complete.
Set Clock Automatically
Clock Setting completed successfully.
4/4/2006 12:15 AM
DST.....................
Time Zone..........
to complete.
Notes
This may take some time, up to a few hours in some cases.
If the following message appears
Set Clock Automatically
Setup
Setting completed as follows.
Finished the setup with this clock time?
Note: Selecting "No" will start channel
Channel
scanning again and renew the clock time.
Yes
Setup
Disc
12/14/2005 5:28 AM
Video
DST..................
Time Zone.......
EST
Audio
Display
ENTER
TV Screen
RETURN
If the time is correct, w to select "Yes", then [ENTER].
– If you select "No", auto setting starts again, then the above
screen reappears. Repeat this step until the correct time appears.
If the clock is not correct, set the clock with "Adjust Time Zone"
(➔ right) or "Set Clock Manually"(➔ 32).
On
EST
No
Off
Tips
To cancel in the middle
Press [RETURN]. The unit then displays "Set Clock Manually" screen
(➔ 45, Manual Clock Setting).
Time Zone
Time Zone shows the time difference from Greenwich Mean Time
(GMT).
EST (Eastern Standard Time)
CST (Central Standard Time)
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
For other areas: xx hr
DST (Daylight Saving Time)
If you select "On", the clock is advanced one hour starting at 2 a.m.
on the second Sunday in March and ending at 2 a.m. on the first
Sunday in November.
Set the DST period manually when it varies according to regions
(➔ 45).
Adjust Time Zone
Adjust the time zone (–1 or 1) if it was not set correctly
with auto clock setting.
You can set this menu only after "Set Clock
Automatically" is completed.
Perform steps 1–3 of "Clock Settings".
e, r to select "Adjust Time
Zone", then
e, r to select "
Adjust Time Zone
0
Tips
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].

Automatic Off Timer

This determines how long the unit stays on when it's
not being used. Default = 6 hours (then it switches to
standby) To turn off the "Off Timer", or to change the
setting to 2 hours, see page 32.
= GMT –5
= GMT –6
= GMT –8
= GMT –9
= GMT –10
1" or "1" then
47
RQT8850

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmrez17k - diga dvd recorder

Table of Contents