Connecting To A Television And A Satellite Receiver - Panasonic Diga DMR-EZ17 Operating Instructions Manual

Basic Connection
Note: The terminals on the rear of your TV and Satellite Receiver may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
• Additional coaxial cable and audio/video (AV) cable are required.
• If your TV does not have AV IN terminals (➔ 41).

Connecting to a Television and a Satellite Receiver

Rear of this unit
step
5
Satellite
antenna
Coaxial cable from the satellite antenna to the "SATELLITE IN" on the satellite receiver.
Coaxial cable (included) from the "RF OUT" on the satellite receiver to the "VHF/UHF RF IN"
on the TV.
Audio/video cable (included) from the "OUT" on the unit to the "AV IN" on the TV.
Audio/video cable from the "AV OUT" on the satellite receiver to the "IN1" on the unit.
AC power supply cord (included) from the "AC IN~" on the unit to a household AC outlet.
40
RQT8850
VHF/UHF
To a household AC outlet
(AC 120V, 60 Hz)
step
1
SATELLITE IN
AUDIO IN VIDEO
R L IN
Red White Yellow
step
3
Red White Yellow
Red White Yellow
step
4
Rear of Satellite Receiver
Red White Yellow
AUDIO OUT VIDEO
RF OUT
R L OUT
VHF/UHF
RF IN
Rear of TV
step
2