Scheduled Recording - Panasonic Diga DMR-EZ17 Operating Instructions Manual

Scheduled Recording

Refer to "Advanced Scheduled Recording" (➔ 15) for detail information on scheduled recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
• RAM If the disc is protected, release protection (➔ 27).
• Insert a disc with enough remaining blank space.
• Confirm that the clock on the unit's display is set to the correct time.
• If connected via a cable box or satellite receiver, set channel there
before scheduled recording starts.
e, r to select "New Scheduled Recording",
then
w, q to move through the items and e, r to set
the items.
Channel/Input
Date/Frequency – You can set a daily or weekly program.
On (start time) / Off (end time)
Mode
Name
– Repeat steps 2−4 to program other recordings.
when you have finished programming.
– "z" lights on the unit's display.
8
RQT8850
– TV Station/External Input
– Hold button to change in 30-minute increments.
– Recording mode
– Press [ENTER], see page 21.
Channel, Caption
Preview of selected
channel
Schedule list Remaining Recording Time DVD 1:58 SP
3/26 Tue 12:53 PM
No Channel Date On Off Mode Check
New Scheduled Recording
Press ENTER to set new schedule.
ENTER
Timer Off A
S SUB MENU CANCEL
SCHEDULED Remaining Recording Time DVD 1:58 SP
RECORDING 3/26 Tue 12:53 PM
Channel/ Date/
On Off Mode
Input Frequency
4-1 -------- --:-- -- --:-- -- --
Name
4-1 KPO-SD
Set Channel/Input.
ENTER
S SUB MENU Cancel 0 -- 9 Number
RETURN
Tips
• Icons such as " " indicate usable
RAM
discs. Refer to pages 52 and 53.
Notes
• Be sure to perform step 5 before the
scheduled recording time. Scheduled
recording will work only if "z" is
displayed.
• "z" flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
• When scheduled recordings are set to
start one immediately after another, the
unit cannot record the beginning of the
later program.
• If two scheduled recording times
overlap, the first recording always has
priority. The second recording will start
only after the first recording has finished
• When starting time for a scheduled
recording is the same, the recording that
you programmed later has priority.
• If you set DST (Daylight Saving Time)
to On when manually setting the clock,
scheduled recording may be affected
when summer time switches to winter
time and vice versa.