Main Unit
1
Disc tray
Opening the front panel
Press down on the
with your finger.
POWER on/off button (POWER ^/I) ........... (➔ 6)
1
•
Press to switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small amount
of power.
Connector for a digital video (DV)
2
camcorder ................................................. (➔ 23)
IN2 input terminals (IN2) .......................... (➔ 22)
3
The Unit's Display
Recording indicator
1
Main display section
2
Disc indicator
3
This indicator lights up when a disc that is supported by this
unit is inserted.
2
part
1
5
4
The unit's display
3
4 5 67 8 9
Channel Select ........................................... (➔ 6)
4
Stop button ............................................. (➔ 6, 7)
5
Play/✕1.3 button ......................................... (➔ 6)
6
Reset button ............................................. (➔ 55)
7
Start recording ............................................ (➔ 7)
8
Disc tray open/close button ........................ (➔ 6)
9
2
3
Scheduled recording indicator (➔ 8 )
4
On:
When a scheduled recording program is registered and a
recordable disc is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no disc, etc).
It does not flash if Quick Start is off.
Progressive indicator
5
This indicator lights up when you select "On" in "Progressive"
(➔ 31).
Remote control
signal sensor
51
RQT8850