Setting The Driver Device Options - Oki C9850hdn Advanced User's Manual

S
ETTING THE DRIVER DEVICE OPTIONS
This section explains how to ensure that your printer driver can utilise all of the hardware
features installed in your printer.
Accessories such as hard disk, duplex unit (two sided printing), additional paper trays, etc.,
will only be usable if the printer driver on your computer knows they are there.
In some cases the hardware configuration of your printer is automatically detected when
the driver is installed. However, it is advisable to at least check whether all of the available
hardware features are listed in the driver.
This procedure is essential if you subsequently add extra hardware features to your printer
after the drivers have been installed and set up.
NOTE
Remember that if your printer or MFP is shared between users on different
computers, the driver must be adjusted on each user's machine.
To set the driver device options:
1. Access the driver's Properties window.
2. Select the Device Options tab.
3. Set the options for any devices you have installed, including the correct number of
paper trays, finisher, duplex unit, etc.
4. Click OK to close the window and save your changes.
Printing from Windows – PCL > 14