Special Setup For The Copying; Resolution Setup; Zoom Setup; Assembled Copy Setup - Oki B2520 User Manual
Oki b2520: user guide
Hide thumbs
Also See for B2520:
- Brochure & specs (2 pages) ,
- Quick start (2 pages) ,
- Replacement instructions (2 pages)
Table of Contents
Advertisement
1 Page to 1 copy mode).
7 Adjust the desired origin values with the
digital keyboard buttons
confirm with the OK button.
8 Choose the resolution depending on the
printing quality that you want DRAFT,
AUTO, QUALITY TEXT or PHOTO with the
buttons
or
, then confirm with the OK
button.
9 Adjust the contrast level with the buttons
or
, then confirm with the OK button.
10 Adjust the desired brightness level with the
buttons
or
, then confirm with the OK
button.
11 Choose the paper type NORMAL, THICK
with the buttons
the OK button.
Special setup for the copying
To enter various settings, press the
the appropriate numbers on the keypad. For
example, to change the resolution, press the
button, then press 8, 4, 1, on the keypad.
Setups done through this menu become the device
default setups after you confirm.
When the quality of the printing is not
satisfying, you can proceed to a
calibration (see Calibrate your
scanner, page 35).
Resolution setup
The RESOLUTION parameter allows you to setup
the photocopy resolution.
841 - ADVANCED FCT/COPY/RESOLUTION
1 Choose the resolution with the buttons
according to the following table:.
Parameter
Low resolution.
DRAFT
Standard resolution for
documents containing text and
AUTO
graphics.
Optimal resolution for
QUALITY
TEXT
documents containing text.
Optimal resolution for
documents containing
PHOTO
photographies.
2 Confirm your choice by pressing the OK
button.
or
then
or
, then confirm with
button and
or
Signification
You can also change the resolution by
pressing the
Zoom setup
The ZOOM parameter allows you to reduce or
enlarge an area of a document by choosing the
origin and the zoom level to apply to the
document, from 25 to 400 %.
842 - ADVANCED FCT/COPY/ZOOMING
1 Enter the desired zoom level with the
Alpanumerical keyboard or choose among
predefined values with the buttons
2 Confirm your choice by pressing the OK
button.
Assembled copy setup
843 - ADVANCED FCT/COPY/ASSEMBLED
The ASSEMBLED parameter allows you to
assemble or disassemble your copies. Enter the
desired setting and confirm your choice by
pressing the OK button.
Analysis origin setup
If you want, you can change the origin of the
scanner.
By entering new values for X and Y in mm (X <
209 and Y < 280), you move the analysed area as
shown on the diagram below.
844 - ADVANCED FCT/COPY/ORIGIN
1 Select the X and Y coordinates with the
buttons
or
2 Setup the desired coordinates with the
digital keyboard or the buttons
confirm your choice by pressing on the OK
button.
- 18 -
B2520 / B2540
button.
and
Analysed area
.
and
.
,
Advertisement
Table of Contents
