Received Faxes Reduction Mode; Technical Parameters - Oki B2520 User Manual

Received faxes reduction mode

This menu allows you to reduce received faxes for
printing. This adjustment can be automatic or
manual.
Automatic mode:
This mode automatically resizes received faxes.
To set automatic mode:
246 - SETUP / RECEPTION / REDUCTION
1 Select Automatic and confirm with OK.
2 To exit this menu, press
Manual mode:
The machine proposes a 70 to 100 % reduction.
Outside these values, the machine beeps for error.
This fixed reduction will be used when printing
received documents, regardless of the used paper
format.
To set the manual mode:
246 - SETUP / RECEPTION / REDUCTION
1 Select FIXED and confirm with OK.
2 Enter the reduction value (between 70 and
100) and confirm with OK.
3 To exit this menu, press

Technical Parameters

As delivered your machine is preset by default.
However, you may adjust it to meet your
requirements by resetting
parameters.
To set the technical parameters:
29 - SETUP / TECHNICALS
1 Select the desired parameter and confirm
with OK.
2 With the keys
settings by following the table below and
press OK.
.
.
the technical
or , modify the parameter
Parameter
1 - Scanning
mode
2 - TX header
3 - TX speed
4 - Echo protect
6 - EPT mode
7 - COM. display
8 - Eco energy
(ECO)
10 - RX header
11 - RX speed
- 31 -
B2520 / B2540
Signification
Default value of the scan mode
resolution for the documents
to be transmitted.
If this parameter is on, your
header will appear
documents sent to
subscribers with your name,
number, date and number of
pages.
Note: U. S. regulations require
that every fax include the date,
time it is sent, and the name
and fax number of the sender.
Transmission speed
outgoing documents.
For a quality telephone line
(compatible, no
communications occur
maximum speed.
However, it may be necessary
to restrict the transmission
speed for some calls.
If this parameter is on, the on-
line echo will be
during long distance calls.
For some long distance calls
(satellite), the on-line echo
may disturb the call.
Choice between transmission
speed displayed or number of
the page in progress.
Choosing the printer standby
delay: the printer will switch to
standby after a delay
minutes) of NON-operation or
during the period of time of
your choice.
If this parameter is on, all
documents received by your
fax will include the subscriber's
header with his name, number
(if available) fax print date and
the page number.
Transmission speed
incoming documents.
For a quality telephone line
(compatible, no
communications occur
maximum speed.
However, it may be necessary
to restrict the transmission
speed for some calls.
on all
your
for
echo),
at
reduced
(in
for
echo),
at