Startup Sequence - Nortel 2001 Installation And Operation Manual

Startup sequence

Node
TN
The IP Phone 2002 registers with the TPS and, if needed, begins the
firmware download. This takes several minutes. When complete, the
IP Phone 2002 resets.
Note: The Enhanced UNIStim Firmware Download feature for IP Phones
provides an improved method of delivering new firmware to IP Phones.
For further information on Enhanced UNIStim Firmware Download, refer
to IP Line: Description, Installation, and Operation (553-3001-365).
The current system date and time appear on the top line of the display
when the configuration is complete. Self-labeling keys also appear.
11 Check for dial tone and the correct DN above the display.
12 Secure the IP Phone footstand to the base of the IP Phone. Use the angle
adjustment grip on the top back of the IP Phone to adjust the position.
13 (Optional) Customize the feature keys as required. For more information,
see IP Phone 2002 User Guide.
When an IP Phone 2002 is connected to the network, it must perform a startup
sequence. The elements of the startup sequence include:
• obtaining the IP parameters
• finding a default Gateway server
• authenticating the user
See Table 9 for a summary of the IP parameters and how they are obtained.
Nortel IP Phone 2002
the node ID
the TN or VTN
End of Procedure
IP Phones Description, Installation, and Operation
Page 87 of 430