Touch Panel - Nortel 2001 Installation And Operation Manual

Page 132 of 430

Touch panel

553-3001-368 Standard 7.00
Nortel IP Phone 2007
The IP Phone 2007 supports the following additional features:
• 802.1Q VLAN and Layer 2 priority bit support, an industry standard for
managing bandwidth usage — full VLAN capability, including a
manageable integrated switch in the IP Phone for VLAN and priority
tagging for PC and IP Phone traffic
• integrated hardware to support power over Ethernet, for IEEE 802.3af
standard power; also including support for PowerDsine Power over LAN
Hub powering, and Cisco proprietary powering as tested with specific
Cisco Ethernet switch equipment
• Gratuitous Address Resolution Protocol Protection (GARP)
• ability to change the feature key labels
Note: Feature keys will support English characters only.
• language support: English, French, Swedish, Danish, Norwegian,
German, Dutch, Portuguese, Czech, Finnish, Hungarian, Italian, Polish,
Spanish, Japanese, Russian, Latvian, and Turkish
The IP Phone 2007 provides a large, color touch panel display that supports
color XML/HTML content through an external application server.
You perform point and click operations on your IP Phone 2007 using the
touch panel. The touch panel is used with the graphical user interface (GUI)
to present soft keys directly on the display. You can activate all Line/DN keys
and feature soft keys by using the touch panel.
Calibrate the touch panel
Calibrate the touch panel through the Tools menu, which enables you to fine-
tune the touch panel. You are prompted to use the stylus to tap three targets.
For further information, see Procedure 26, "Installing an IP Phone 2007 for
the first time using manual configuration" on
"Installing an IP Phone 2007 for the first time using DHCP" on
Stylus
Operate the touch panel using a stylus or your finger. However, use of a stylus
is recommended to avoid damage to the touch panel.
August 2005
page 151 or Procedure 27,
page 158.