Removing Mvc 2050 From Your Pda; Mvc 2050 Removal - Nortel 2001 Installation And Operation Manual

MVC 2050 removal

4 Select the CD Drive.
5 Select Setup.
6 Follow the instructions on the screen until the Install Wizard asks you if
you want to modify, install, or remove MVC 2050.
7 Select Install. The Install Wizard installs MVC 2050. When installation
finishes, a message displays on the PC:
• "attend to your device (PDA)".
• The PDA displays a message; "do you want to perform a soft
restart?".
8 Select Yes. Your PDA restarts.
Use the following procedure to remove MVC 2050 from your PDA. See
Figure 49 on page 276.
Procedure 44

Removing MVC 2050 from your PDA

1 Select Start. A drop-down menu appears.
2 Select Settings. A Windows folder with a number of programs, usually
shown as icons with names and a row of tabs across the bottom, appears.
3 Select the System tab. Another Windows program folder appears.
4 Select Remove Programs. A list of programs appears.
5 Select Nortel MVC 2050.
6 Select Remove. A dialog box appears, asking you to confirm this
decision.
7 Select Yes. There is a brief pause during removal of MVC 2050. After the
pause, a dialog box appears asking if you want to perform a soft reset.
8 Select Yes. Your PDA restarts and MVC 2050 has been removed.
Nortel Mobile Voice Client 2050
End of Procedure
End of Procedure
IP Phones Description, Installation, and Operation
Page 275 of 430