Replacing An Ip Phone 2002; Procedure 15 - Nortel 2001 Installation And Operation Manual

Replacing an IP Phone 2002

2 If node password is enabled and NULL, choose one of the following:
a. Disable password.
b. Set password as non-NULL.
3 Press OK when the node number displays.
If
node password is enabled and is
not NULL
node password is disabled
4 Enter password at the password screen and press OK.
A TN screen displays.
5 Select the Clear soft key to clear the existing TN.
Two IP Phones cannot share the same TN. You must remove the
IP Phone 2002 that is currently using the TN.

Procedure 15

Replacing an IP Phone 2002
1 Disconnect the IP Phone 2002 that you want to replace.
2 Follow either Procedure 10 on
Procedure 11 on
configure the IP Phone 2002.
Nortel IP Phone 2002
Then
a password screen displays. Go to
step 4.
a TN screen displays. Go to
step 5.
End of Procedure
IMPORTANT!
page 75
page 80 (dynamic IP assignment) to install and
IP Phones Description, Installation, and Operation
Page 91 of 430
(static IP assignment) or