Configuration Utility - Nortel 2001 Installation And Operation Manual

Page 224 of 430

Configuration utility

553-3001-368 Standard 7.00
Nortel IP Softphone 2050
g. Record the Node ID value.
h. Exit the IP Softphone 2050 application.
3 Exit any programs that are running.
4 Disable any anti-virus programs that are running.
5 Uninstall the current IP Softphone 2050 using the Add/Remove
Programs function found in the Control Panel.
6 Insert the CD-ROM disk into the CD-ROM drive of your PC.
Note: Installation should proceed automatically. If it does not, then
continue with step 7. Otherwise go to Step 10.
7 Double-click the My Computer icon.
8 Double-click the CD icon.
9 Double-click the Setup icon.
10 Follow the instructions on the display to complete the installation.
11 Run the IP Softphone 2050 Configuration utility to assign a server
address and to configure audio peripherals.
Use the values you recorded in step 1, if required. You can access the IP
Softphone 2050 Configuration utility from the Windows Control Panel.
Use the Configuration Utility to set the following types of configuration
parameters:
• Communication server parameters
• Sound devices
• QoS
• Server type
There are more advanced configuration settings available but they are not set
as frequently. These include: hardware ID, advanced audio, Listener IP, and
trace. Changing the default settings in these tabs is usually not required.
August 2005
End of Procedure