Preference; Pl Ii (Dolby Pro Logic Ii ) - Marantz SR4400 User Manual

Notes:
• Speakers that you selected "None" for in the
Speaker Size Setup menu will not appear.
• The setup level for each channel is memorized for
reproduction in all surround mode.
• To adjust the speaker levels for 6.1-channel input
sources, you will need to use the 6.1CH Level
Input setup menu.
MENU STRUCTURE of Speaker Level setup
Direct selec Speaker
by remote Distance
Test Tone mode
control setup
MANU
Speaker
Speaker
Level setup
SL
TO MAIN MENU
MAIN
MENU

3. PREFERENCE

AUX AMP
TV MAIN
4. 5.
VOL. SLEEP MUTE VOL.
OSD MENU
1. 3. 5.
OK
2. 5.
SETUP/
MENU OFF
T.TONE
S-DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES DSP
4 5 6
1.
Select "3. PREFERENCE" in SETUP MAIN
MENU with or cursor button.
2.
Press the OK button.
3.
Press or cursor button to select a desired
item.
AUTO
(Auto)
SW
L C R
Listening
Positiom
SR
SB
RETURN EXIT
exit SETUP
Speaker
MENU
Distance setup
4.
Press or cursor button to adjust.
5.
When you select "TO MAIN MENU" by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
"EXIT" then press the OK button to exit the
SETUP MENU.
BASS MIX
• The bass mix setting is only valid when "LARGE"
is set for the front speakers and "YES" is set for
the subwoofer at stereo playback .
• When the "BOTH" is selected, the low frequency
s i g n a l r a n g e o f " L A R G E " a r e p r o d u c e d
simultaneously from those channels and the
subwoofer channel.
When actual low frequency sound volume is
weak depending on room size, use this function
to fill low frequency sound equally in the room.
• When "Mix" is selected, subwoofer output is
determined depending on the speaker sizes for
each channels. If the front speaker size is set to
"Large", subwoofer output is only the LFE signal
contained in Dolby Digital or DTS processed
signals.
Note:
• When Front speaker is set "SMALL", then BASS
MIX is set "MIX". (The display appears "BASS
MIX = ✱✱✱".)
LFE
• Select the output level of the LFE signal
included in the Dolby Digital signal or the DTS
signal.
Select 0dB, -10 dB or OFF with Left or Right
cursor button.
• This setting is available during a digital signal is
playback.
MENU STRUCTURE of PREFERENCE setup
3.PREFERENCE BASSMIX BOTH
MIX
LFE 0 dB
-10 dB
OFF
TO MAIN MENU EXIT
exit SETUP
MENU

4. PL II (DOLBY PRO LOGIC II )

In this mode, the SR4400 includes three controls
to fine-tune the sound-field as follow.
AUX AMP
TV MAIN
4. 5.
VOL. SLEEP MUTE VOL.
OSD MENU
1. 3. 5.
OK
2. 5.
SETUP/ MENU OFF
T.TONE
S-DIRECT AUTO DTS
1 2 3
NIGHT CSII EX/ES DSP
1. 4 5 6
Select "4.PRO LOGIC II" in SETUP MAIN
MENU with or cursor button.
2.
Press the OK button to enter the menu.
3.
Press or cursor button to select a desired
item.
4.
Press or cursor button to select the mode
or set the level.
5.
When you select "TO MAIN MENU" by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
"EXIT" then press the OK button to exit the
SETUP MENU.
PANORAMA:
Select the Panorama mode On or Off with
cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.
DIMENSION:
Set the Dimension level between 0 and 6 level in
1 level interval with or cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more
suitable balance from all the speakers with
certain recordings.
C WIDTH:
Set the Center width level between 0 and 7 level
in 1 level interval with or cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the
center is mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If "NONE" was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
or
19