HP Vectra VT6 User Manual page 84

3 How to Install Accessories Inside Your PC
Installing Disk Drives
7 Locate the appropriate data cable for the disk drive.
Flexible Disk
Drive Cable
IDE CD-ROM drives
should be connected to
the Secondary IDE
Channel cable
(this cable is connected to
the red connector on the
system board)
8 Connect the data and power cables to the rear of the device. (The
connectors are shaped to go in one way only.)
Data Cable
9 Slide the power supply back into position, and tighten its self-
retaining screws (see page 49).
72 English
Power Cable