HP Vectra VT6 User Manual page 112

4 Troubleshooting Your PC and Using the Setup Program
Using the HP Setup Program
3 The PC's Setup program will appear.
Setup Version xx.xx.xx
System BIOS (Version x.xx.xx)
Video Adapter (MGA Millenium 2 MB, Video BIOS version xx.xx)
System Board (Pentium(TM) Pro, XXX MHz)
Memory (xx MB, 640 KB base, 384 KB Reserved, XX Ext.)
Hard Disk Drives (IDE disk detected)
To change a setting, move the highlight to the desired line and
•
follow the instructions on the bottom of the screen.
Use the or
•
another.
Use the or
•
Use the key to set the numeric keypad to cursor control or
•
Num
Lock
numerics.
Use the key to display the first Setup screen.
•
Home
Use the key to display help (press it again to turn the help
•
off).
Use the key to save your settings and exit Setup.
•
Use the key to print the Setup configuration.
•
Use the key to exit Setup without saving any changes.
•
100 English
F1=Help On/Off
keys to move the highlight from one line to
key to display available values.