HP Vectra VT6 User Manual page 26

Changing the Video
Driver after Installation
Enabling the integrated
Audio Interface after
Installation
1 Setting Up Your PC
Installing an Operating System
8 Check that the location of the driver is correct (
click on .
Continue
9 After the installation of the driver has completed, follow the
instructions displayed by Windows NT to restart the computer.
Windows NT starts in VGA mode by default. To install the latest HP
qualified video driver for Windows NT:
1 In the Control Panel, choose the
2 Choose
Change Display Type
3 Click .
Change
4 To install the HP video driver:
a Choose .
Other
b Insert the "XU/VT Drivers and Documentation" CD-ROM and
specify the location of the drivers with
c Choose your desired resolution from the list of Matrox MGA
Millenium drivers and click
d When asked to confirm the location of the drivers, verify that
D:\VIDEO\DISK4
e When the files have been copied from the "XU/VT Drivers and
Documentation" CD-ROM, follow the displayed instructions to
restart the computer.
To enable the integrated audio interface:
1 In the Control Panel, choose the
2 Click on .
Add
3 the highlighted adapter.
Remove
4 Click .
Add
5 Choose
Creative Labs Sound Blaster 1.x, Pro, 16
14 English
icon.
Display
.
.
Install
is displayed then click
icon.
Drivers
from the list and click
), then
D:\IDE\NT35
.
D:\VIDEO\DISK4
.
Continue
.
OK