HP Vectra VT6 User Manual page 67

Configuring Setup for
Windows 95
Configuring Setup for
Other OS
Configuring Plug and Play with the Setup program
You can use the Setup program to select the level of support provided
by the system BIOS for Plug and Play-compatible accessory boards.
1 Turn on the PC and press
2 Highlight the
Plug and Play Device Management
or to select
Full
When
•
Full
configured automatically. However, if you install a non-Plug and
Play accessory board, you must use the Add New Hardware
wizard to determine a conflict-free setting for the board.
3 Press to save your selection and exit from the Setup program.
1 Turn on the PC and press
2 Highlight the
Plug and Play Device Management
or to select
Full
When is selected, all Plug and Play accessories will be
Full
initialized by the BIOS. However, you will need to determine a
conflict-free setting for the board.
3 Press to save your selection and exit from the Setup program.
3 How to Install Accessories Inside Your PC
when
.
is selected, all Plug and Play accessories will be
when
.
Installing Accessory Boards
appears.
<Setup=F2>
line and use
appears.
<Setup=F2>
line and use
English 55