HP Vectra VT6 User Manual page 118

Configuring Audio
Configuring the Video
Adapter
4 Troubleshooting Your PC and Using the Setup Program
Using the HP Setup Program
Use these options to reserve system resources for the computer's
integrated SoundBlaster
If you do not want to use the audio interface, you should highlight the
Audio Interface
system resources available for other system components.
Audio
Audio Interface . . . . . . . . . Enabled/Disabled
Base I/O Address
IRQ Channel . . . . . . . . . . . 5/7/10
8-bit DMA Channel . . . . . . . . 1/3
16-bit DMA Channel
MIDI Port base I/O address
Joystick/Game Port
Most of these video options are preconfigured for optimal video
performance.
If your display is "Plug and Play" (supports Display Data Channel),
highlight
Plug and Play Display
Video
Primary Adapter . . . . . . . . . EGA/VGA or Similar
Video BIOS shadowing
Plug and Play Display . . . . . . On/Off
If you install more video memory, ensure that the Setup program
detects it and configures the
wrong, check that the memory module is installed correctly.
106 English
TM
audio interface.
option and select
Disabled
. . . . . . . . 220/240/260/280
. . . . . . . 5/7
. . . 330h/300h
. . . . . . . Enabled/Disabled
and select
. . . . . . Enabled/Disabled
Video Memory
. This will make more
.
Enabled
size correctly. If it is