HP Vectra VT6 User Manual page 63

3 Slide each memory module into the slot at 90° to the system board
(hold the memory module with the cutouts closest to the processor).
Slide the memory module into
o
the slot at 90
4 Firmly press each memory module completely into the connector
until the retaining clips click into position.
5 Repeat this procedure for each pair of memory modules you are
installing.
6 Install any other accessories before replacing the cover (see page
44). Reconnect all cables and power cords.
Completing the Main Memory Installation Procedure:
1 Switch on the PC. When
Power-On-Self-Test has detected a change in your memory
configuration) follow the displayed instructions to run the Setup
program.
2 Check that Setup has automatically detected and configured the
fields. Ensure the
Memory Size
incorrect, check that you have correctly installed the memory
modules.
3 Set the extended memory limit field to
for i286 processors (or earlier processors) that cannot work with
more than 16 MB total memory.
4 Press to save and exit the Setup program.
3 How to Install Accessories Inside Your PC
Push the module until the retaining clips
click into position
appears (indicating that the
Error 0250
memory is correct. If it is
TOTAL
if you use software designed
Y
Installing Memory
English 51