HP Vectra VT6 User Manual page 29

Installing the
HP Video Driver
Selecting a Display
Changing Display
Settings
6 Restart OS/2 to use the new drivers.
After successful installation of OS/2, you should install the HP video
driver from the "XU/VT Drivers and Documentation" CD-ROM.
1 Insert the "XU/VT Drivers and Documentation" CD-ROM in the CD-
ROM drive.
2 In the OS/2
System
the OS/2
Full Screen
3 At the command prompt, type the following:
D:
CD VIDEO\DISK5
INSTALL /U
This will start an 'unattended' installation of the video drivers.
4 When the installation of the drivers has completed, exit from the
command prompt, shutdown the operating system, then restart the
system.
1 In the OS/2
System
the OS/2
Full Screen
2 At the command prompt, type the following:
CD \MGA\OS2
MGAMON
This will start the MGA Display selection program. Choose your
display (monitor) from the list.
3 When this selection process has completed, exit from the command
prompt, shutdown the operating system, then restart the system.
1 In the OS/2
System
2 Click on the
System
screen resolution).
folder, open the
Command Prompts
icon.
folder, open the
Command Prompts
icon.
folder, open the
System Setup
icon and change the settings (for example, the
1 Setting Up Your PC
Installing an Operating System
folder and click on
folder and click on
folder.
English 17