Punch - Gestetner DSc545 Printer Reference

Punch

With the optional 2 Tray Finisher installed, holes can be punched into printed
output.
Punch Position
The specified punch position varies depending on paper feed and print data ori-
entation. The following table shows punch positions:
Note
❒ Punch positions will vary slightly from page to page as holes are punched
into each sheet individually.
Reference
For information about paper sizes that can be punched, see "Supplementary
Informations", Copy/ Document Server Reference.
For printing methods, see the printer driver Help.
Punching Precautions
Follow these precautions when using the punch function.
Important
❒ To use this function, the optional tray Finisher SR3000 and punch unit must
be installed on the printer.
Printing with the Finisher
ANV101S
3
117