Placing Originals On The Exposure Glass - Ricoh DSc332 Operating Instructions Manual

Placing Originals
A A A A
Press [Special Original].
1
B B B B
Select the original orientation.
Standard orientation
A Make sure
90° turn
A Place the original in the land-
scape orientation, and then
press
C C C C
Press [OK].
14
is selected.
.
Placing Originals on the
Exposure Glass
A A A A
Lift the exposure glass cover or
the ADF.
Important
❒ Do not lift the exposure glass
cover or the ADF forcefully.
O t h e r w is e , t h e A D F c o v e r
might open or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or ADF more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
B B B B
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1.
Positioning mark
2.
Scale
Note
❒ Start with the first page to be
copied.
C C C C
Lower the exposure glass cover or
ADF.
ZLFH140E