Placing Originals On The Exposure Glass - Ricoh Afico 3030 Operating Instructions Manual

Placing Originals
B
Select the original orientation.
Standard orientation
1
A Make sure
90° turn
A Place original in the landscape
orientation, and then press
.
C
Press [OK].
14
Placing Originals on the
Exposure Glass
A
is selected.
B
1.
2.
C
Lift the exposure glass cover or
the ADF.
Important
❒ Do not lift the exposure glass
cover or the ADF forcefully. If
you do, the ADF cover might
open or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or ADF more than 30°. If
you do not, the size of the origi-
nal might not be detected cor-
rectly.
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
Positioning mark
Scale
Note
❒ Start with the first page to be
copied.
Lower the exposure glass cover or
ADF.
ZLFH140E