Placing Originals; Original Orientation; Placing Originals On The Exposure Glass - Ricoh DSm616 Operating Instructions Manual

Placing Originals

Placing Originals
Note
1
❒ Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.15 "Originals" .

Original Orientation

You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
Note
❒ Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Originals
18
ADF Exposure
glass
set11EE
set23EE
Placing Originals on the
Exposure Glass
A A A A
Lift the exposure glass cover or
ADF.
Important
❒ Do not lift the exposure glass
cover or ADF forcefully. If you
do, the ADF cover might open
or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or ADF by more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
B B B B
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1.
Positioning mark
2.
Left scale
Note
❒ Start with the first page to be
copied.
C C C C
Lower the exposure glass cover or
ADF.
AAI025S