Fuser Adjustment For Thick Paper - Ricoh DSc332 Operating Instructions Manual

Troubleshooting
Fuser Adjustment for Thick
Paper
When colour shifting occurs using thick
paper
Follow the procedure below if colour
shifting occurs when you use the
thick paper of A4 size or larger.
Important
❒ When the toner cartridge is almost
empty, "Fuser Adjustment: Thick
Paper" is not available. Replace the
toner cartridge before the adjust-
ment.
5
Note
❒ Thick paper is needed for the ad-
justment. Prepare thick paper sim-
ilar to what you normally use.
A A A A
Load the A4L
per in the Bypass Tray.
Reference
For details about paper size and
the procedure for loading paper
in the Bypass tray, see "Copy-
ing from the Bypass tray", Copy
Reference
B B B B
Press the { { { { User Tools/Counter} } } } key.
C C C C
Press [Maintenance].
132
L or larger thick pa-
L L
ZFLS110E
D D D D
Press [Colour Registration].
E E E E
Press [Fuser Adjustment: Thick Pa-
per].
Important
❒ When the toner cartridge is al-
most empty "Fuser Adjustment
cannot be performed. Replace
Toner cartridge." appears on the
panel display.
F F F F
Press [OK].
Auto Colour Registration begins.