Garmin G1000:Piper Pilot's Manual page 384

ADDITIONAL FEATURES
Selecting a chart:
1) While viewing the Navigation Map Page, Flight Plan Page, or Nearest Airports Page, press the SHW CHRT
Softkey. The airport diagram will be displayed on the Airport Information Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to select either the Airport Identifier Box or the Approach Box.
4) Turn the small and large FMS Knob to enter the desired airport identifier.
5) Press the ENT Key to complete the airport selection.
6) Turn the large FMS Knob to select the Approach Box.
7) Turn the small FMS Knob to show the approach chart selection choices.
8) Turn either FMS Knob to scroll through the available charts.
9) Press the ENT Key to complete the chart selection.
While the APPROACH Box is selected using the FMS Knob, the G1000 softkeys are blank. Once the desired
chart is selected, the chart scale can be changed and the chart can be panned using the Joystick. Pressing the
Joystick centers the chart on the screen.
The aircraft symbol is not shown on FliteCharts. The Chart Scale Box displays a banner 'CHART NOT TO
SCALE', and the Aircraft Not Shown Icon is displayed in the lower right corner of the screen.
8-32
Figure 8-40 Approach Information Page, Chart Selection
Garmin G1000 Pilot's Guide for Piper PA32
Chart Not
To Scale
Select Desired
Approach Chart
from Menu
Pan Entire
Chart With
the Joystick
Aircraft Not
Shown Icon
190-00692-00 Rev. B