Table of Contents
Advertisement
Auto Zoom Out
The map zooms out as long as the following conditions are true:
• The active waypoint is not visible in the current zoom range or the current zoom range is below the
minimum zoom range.
• The current zoom range does not exceed the maximum zoom range
Enabling/disabling automatic zoom:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group
4) Press the ENT Key.
5) Highlight the 'AUTO ZOOM' field.
6) Select 'Off', 'MFD Only', 'PFD Only', or 'ALL On'.
7) Press the ENT Key to accept the selected option. The flashing cursor highlights the 'MAX LOOK FWD' field.
Times are from zero to 999 minutes.
8) Use the small and large FMS Knobs to set the time. Press the ENT Key.
9) Repeat step 8 for 'MIN LOOK FWD' (zero-99 minutes) and 'MAX LOOK FWD' (zero to 999 minutes).
10) Press the FMS Knob to return to the Navigation Map Page.
190-00692-00 Rev. B
Garmin G1000 Pilot's Guide for Piper PA32
GPS NAVIGATION
5-9
Advertisement
Table of Contents
