Table of Contents
Advertisement
GPS NAVIGATION
6) Press ENT again to activate a Direct-to.
Select a Direct-to Destination to a Recently Entered Identifier
1) Press the Direct-to (
) Key.
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-37. The list
is populated only when navigating a flight plan.
Figure 5-39 Recently Entered Waypoints List (MFD)
3) Turn the small FMS Knob to the right to display the 'RECENT' waypoints as shown in Figure 5-37.
4) Turn the large FMS Knob to select the desired airport.
5) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
6) Press ENT again to activate a Direct-to.
190-00692-00 Rev. B
Garmin G1000 Pilot's Guide for Piper PA32
5-39
Advertisement
Table of Contents
