Table of Contents
Advertisement
GPS NAVIGATION
DIRECT-TO NAVIGATION SHORTCUTS USING THE FMS KNOB
Select a Direct-to Destination to a Flight Plan Waypoint
1) While navigating an active flight plan, press the Direct-to (
2) Turn the small FMS Knob to the left to display a list of flight plan waypoints as shown in Figure 5-37.
3) Turn the large FMS Knob to select the desired waypoint.
4) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
5) Press ENT again to activate a Direct-to.
Select a Direct-to Destination to a Nearest Airport
1) Press the Direct-to (
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-38. The list
is populated only when navigating a flight plan.
3) Turn the small FMS Knob to the right to display the 'NRST' airports to the aircraft's current position as shown in
Figure 5-38.
4) Turn the large FMS Knob to select the desired airport.
5) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
5-38
Figure 5-35 Flight Plan Waypoint List (MFD)
) Key.
Figure 5-36 Nearest Airport List (MFD)
Garmin G1000 Pilot's Guide for Piper PA32
) Key.
190-00692-00 Rev. B
Advertisement
Table of Contents
