Table of Contents
Advertisement
SKYWATCH TAS SYMBOLOGY
SKYWATCH uses the following Traffic Map symbols (Table 6-12):
SWITCHING FROM STANDBY MODE
The unit must be in operating mode for traffic to be displayed. The ability to switch out of standby into
operating mode on the ground is especially useful for scanning the airspace around the airport before
takeoff.
Switching to operating mode from standby mode:
1) On the Traffic Page, press the OPERATE Softkey.
OR :
1) Press the MENU Key.
2) Turn the small FMS Knob to select 'Operating Mode'.
3) If 'Operating Mode' is selected from the FMS menu, press the ENT Key to confirm and place SKYWATCH in
operating mode.
4) To switch to Standby Mode from the Traffic Page, press the STANDBY Softkey.
190-00692-00 Rev. B
TIS Symbol
Proximity Advisory (PA)
Traffic Advisory Off Scale
Table 6-12 TAS Symbol Descriptions
Garmin G1000 Pilot's Guide for Piper PA32
Description
Non-Threat Traffic
Traffic Advisory (TA)
HAZARD AVOIDANCE
6-67
Advertisement
Table of Contents
