Finishing Scanner Operation - Fujitsu ScanSnap S300 Operator's Manual

■ Finishing Scanner Operation

Exiting ScanSnap Manager
Operation
When you do not want ScanSnap Manager to stay resident on your computer, right-click the
ScanSnap Manager icon
ScanSnap Manager.
If you exit ScanSnap Manager, you can no longer use the ScanSnap.
HINT
To activate ScanSnap Manager again, from the [Start] menu, select [All
Programs]
Disconnecting the ScanSnap
Operation
1. Close the paper chute to turn off the ScanSnap.
⇒
The ScanSnap Manager icon on the taskbar changes to the inactive state
The ScanSnap power indicator goes off.
2. Disconnect the USB cable from your computer.
3. Disconnect the Power cable or USB bus power cable from the power outlet or
computer.
The ScanSnap is turned on/off in conjunction with the personal computer or
HINT
opening/closing of the paper chute. Ordinarily, you can forget about turning on/
off the ScanSnap being connected to the personal computer.
on the taskbar, and select [Exit] in the Right-Click menu to exit
S
S
[ScanSnap Manager]
ScanSnap S300 Operator's Guide
3.1 Flow of Operations
[ScanSnap Manager].
3
.
S
S
37