Using The Scansnap Quick Menu - Fujitsu ScanSnap S300 Operator's Manual

4.4

Using the ScanSnap Quick Menu

When the ScanSnap is in Quick Menu Mode, the ScanSnap Quick Menu pops up upon scanning
with a [SCAN] button press.
In this menu, you can select an action as follows:
Action List
You can select an action you want to perform with scanned images.
Place the mouse pointer on an action and click it to perform any action.
Up to four actions are selectable.
Action
Save with ScanSnap
Organizer *1
Scan2Folder
Scan2E-mail
Scan2Print
*1: This is not available unless ScanSnap Organizer is installed.
Action List Descriptions of the selected action
PDF files are created based on the scanned images, and ScanSnap
Organizer is started to display the scanned images. Those files are
saved in a folder (on your computer) specified in ScanSnap
Organizer.
PDF files are created based on the scanned images and saved in a
specified folder (shared folder).
⇒
"5.2 Saving Data in the Specified Folder" (page 89)
PDF files are created based on the scanned images and an e-mail
program is started with the PDF files attached to an e-mail message.
⇒
"5.3 Sending Files by E-Mail" (page 101)
Scanned images are printed with the printer.
⇒
"5.4 Using the ScanSnap as a Copy Machine" (page 117)
ScanSnap S300 Operator's Guide
4.4 Using the ScanSnap Quick Menu
Description
4
81