Scanning Color Documents In Black And White - Fujitsu ScanSnap S300 Operator's Manual

■ Scanning color documents in black and white

By default, the ScanSnap automatically recognizes whether scanned documents are color or
monochrome. Color documents are scanned in color mode and monochrome documents are
scanned in black-and-white mode.
If you wish to scan color documents in the black-and-white mode, change the settings by following
the procedure below.
Operation
1. Right-click the ScanSnap Manager icon
[SCAN Button Settings] from the menu.
2. Select the [Scanning] tab, and then select [B&W] in the [Color mode] drop-down list.
To scan color documents in color, select [Color].
3. Click the [OK] button to close the dialog box.
Operation
4. Load the document onto the ScanSnap.
5. Press the [SCAN] button
⇒
Scanned images will be output in black and white.
134
on the taskbar, and then select the
S
S
.