Fujitsu ScanSnap S300 Operator's Manual page 55

•
By default, documents are scanned using the settings below.
HINT
Image quality: Normal
Color mode: Auto Color Detection
•
Before scanning documents of printed or handwritten text, mark the [Setting
for text only document] checkbox. In the [ScanSnap Manager - Scan and Save
Settings] dialog box, select the [Scanning] tab, and then the [Option] button to
display the [Read mode option] dialog box in which you can enable the above
function. For details, refer to section
47).
•
The application that starts up automatically after scanning is the one selected
on the [Application] tab of the [ScanSnap Manager - Scan and Save Settings]
dialog box.
For details, refer to section
•
Scanned images can also be saved in JPEG format. To save images in JPEG
format, change scanning settings beforehand.
For information about scanning settings, refer to section
Scanning Settings" (page
Settings] dialog box, you can change the following settings:
- Application that interacts with the ScanSnap
- Folder in which scanned images are saved
- File name of scanned images
- Scanning mode (whether to perform fast scanning or excellent scanning,
whether to produce sharp text images, whether to automatically remove
blank pages, correct skewed images, change orientation of pages, load
the document face up, and continue scanning another document)
- File format of scanned images (*.pdf/*.jpg)
- Whether to text-recognize the scanned document to make PDF files
searchable
- Whether to include all scanned pages in a PDF file or create PDF files,
each of which includes a preset number of pages
- Whether to password-protect the created PDF files
- Paper size of images to be scanned
- File size of scanned images (compression rate)
Scanned images may be scaled in some degree.
•
When ScanSnap Organizer or CardMinder becomes active, the ScanSnap
automatically interacts with the active application. While an application is
interacting with the ScanSnap, the ScanSnap Quick Menu is disabled, and
scanned images are stored in the active application. Scanned document
images are opened with the active application. Interaction is disabled when
the application becomes inactive or when it is closed.
For information about this automatic interaction, refer to section
Automatic Interaction with Applications" (page
"4.2 Changing Scanning Settings" (page
"4.2 Changing Scanning Settings" (page
47). In the [ScanSnap Manager - Scan and Save
84).
ScanSnap S300 Operator's Guide
3.1 Flow of Operations
47).
"4.2 Changing
"4.5 About
35
3