⇒
Next, the [ScanSnap Manager Setting 2] dialog box appears.
•
You can also change the setting after installation.
HINT
For details, refer to
section
•
This dialog box will not appear when programs are re-installed. The settings
configured before re-installation remain effective.
9. In the [ScanSnap Manager Setting 2] dialog box, if you want to receive notification
about the scanning result, mark the [Notify scanning result] checkbox, and then click
the [Next] button.
If the checkbox is marked, the message appears after scanning to inform you whether blank
pages are automatically removed or whether images are automatically rotated.
⇒
Clicking the [Next] button displays the [Start Copying Files] dialog box.
•
You can change this setting after installation.
HINT
For details, refer to
•
The dialog box above will not appear when re-installing programs.
The settings configured before the re-installation remain effective.
"- Set the documents with its face up" on page 61
"4.2 Changing Scanning Settings" (page
"Show scanning results" on page
ScanSnap S300 Operator's Guide
2.1 Installing the Supplied Programs
47).
45.
in
2
13