Fujitsu ScanSnap S300 Cleaning Instructions

BEFORE CLEANING
Open the ADF while pulling the cover
open lever
ADF Cover
Open Lever
Turn the Scanner
Pad Assy
Wipe downwards. When cleaning take care to prevent the cleaning wipe from catching on the
metal parts
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Pick Roller
Clean lightly taking care not to scratch the surface.
Plastic Rollers x 4
Clean lightly while rotating with your finger. Take care not to roughen the surface.
White Sheets x 4
White strips along the edge of the glass. Clean lightly.
Pad Assy
OFF while cleaning the following locations
Using F1 Impregnated Cleaning Wipes
C l e a n i n g I n s t r u c t i o n s f o r
S c a n S n a p S 3 0 0 / S 3 0 0 M
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Consumables
Consumable Kit
Cleaning Kit
Plastic Rollers
EjectRollers
Glass
Part Number
CON-3360-001A
SC-CLE-WGD
Feed Rollers
Pick Roller
White Sheets
P.T.O.