Fujitsu ScanSnap S300 Operator's Manual page 117

Operation
4. Load the document on the ScanSnap.
For details, refer to sections
(page 38)
5. Press the [SCAN] button
⇒
Scanning is started.
⇒
When scanning is complete, the preview window appears.
Operation
6. Verify a scanned image in the preview window.
You can also change file names and destination folders and specify whether to state a path to
a destination folder in an e-mail message to notify other members of it.
Preview Window
Preview Window
The image of the selected file is displayed.
You can use the following navigation controls for paging through documents:
:
5.2 Saving Data in the Specified Folder
"3.2 Paper Sizes of Documents to be Scanned"
and "3.3 Loading Documents" (page
.
To go to the first page, click this First Page button.
ScanSnap S300 Operator's Guide
40).
5
97