Where To Go Next - Cisco ME-C3750-24TE-M Hardware Installation Manual

Where to Go Next

Where to Go Next
Catalyst 3750 Switch Hardware Installation Guide
3-50
If the default configuration is satisfactory, the switch does not need further
configuration. You can use any of these management options to change the
default configuration:
Start CMS as described in the switch software configuration guide, and
•
configure the switch as a member of a cluster or as an individual switch.
Use the CLI to configure the switch as a member of a cluster or as an
•
individual switch from the console. Refer to the Catalyst 3750 Switch
Command Reference on Cisco.com for information on using the CLI with a
Catalyst 3750 switch.
Start an SNMP application such as the CiscoView application.
•
Chapter 3 Switch Installation
78-15136-02