Leds; Summit5I Switch Rear View; Power Sockets - Extreme Networks Summit Summit1i Hardware Installation Manual

Table 23: GBIC types and maximum distances (continued)
Standard
LX100
(1550 nm optical window)
UTP
*Extreme Networks proprietary. Connections between two Extreme Networks 1000BASE-LX interfaces can use a maximum distance of 10,000
meters.
NOTE
For more information about the supported GBIC types, see "GBIC Specifications" on page 23.

LEDs

All three Summit5i models have the following LEDs:
• Unit status
• Management
• Port status
• Port speed
• Management port
For information about the LEDs and their activity on the Summit5i switch, see "Summit1i, Summit5i,
Summit7i, and Summit48i Switch LEDs" on page 77.

Summit5i Switch Rear View

Figure 21 shows the rear view for the Summit5i switch.
Figure 21: Rear view of the Summit5i switch
AC Connectors

Power Sockets

The Summit5i switch supports up to two power supplies. Each power supply has its own power socket.
When a second power supply is installed and connected to a second independent power source, both
provide a redundant, load-shared power source to the Summit5i switch. If one of the power sources or
Extreme Networks Consolidated "i" Series Hardware Installation Guide
Media Type
10/125 µm single-mode fiber
Category 5 UTP cable
Label
Summit5i Switch Rear View
Mhz•Km Maximum
Rating Distance (Meters)
100,000
– 80
Reset button Console port
Ethernet port
SHG_Rr5
71