Summit48Si Switch Leds - Extreme Networks Summit Summit1i Hardware Installation Manual

• Model number—Shows the model number assigned to this device
• Part number—Shows the part number assigned to this device
• Serial number—Refer to the serial number when you contact Extreme Networks technical support
• MAC address—Shows the unique Ethernet MAC address assigned to this device
NOTE
The label that indicates country and safety certifications for the Summit48si switch is located on the
bottom of the switch.

Summit48si Switch LEDs

Table 29 describes the LED activity on the Summit48si switches.
Table 29: Switch LED activity for the Summit48si switch
LED
Unit Status LEDs
MGMT
10/100 Mbps Port Status LEDs
Mini-GBIC Port Status LEDs
Extreme Networks Consolidated "i" Series Hardware Installation Guide
Color Indicates
Green The switch is operating normally.
Power On Self Test (POST) or software download in progress.
Amber The switch has failed its POST or is experiencing an overheat or
fan failure.
Green Link is present; port is enabled.
Green blinking Frames are being transmitted/received on this port.
Off Link is not present; port is disabled.
Green Link is present; port is enabled.
Amber Frames are being transmitted/received on this port.
Green blinking Port is disabled.
Off Link is not present.
Summit48si Switch LEDs
85